Syntheway - Organux v1.0 (Pc/Linux)

Organux is a virtual organ VST plug-in designed for creating a wide range of classic and modern organ sounds.

Features

*

Hybrid method that combines sampling and synthesis techniques.
*

Selector with 20 predefined types of organ sounds such as:
*

Baroque Pipe Organ
*

Cathedral Organ
*

Farfisa Organ
*

Ethereal Organ
*

Chorus Organ
*

Pipe Organ
*

Church Organ
*

Percussive Organ
*

Gothic Organ
*

Fast and Slow B3 Organ
*

Rock Organ
*

Blues Organ
*

Detuned Organ
*

Electronic Organ, and more...
*

LFO (Low Frequency Oscillator) with modulation depth, frequency, offset, waveforms (sine-triangle-square) add expressive effects such as "Tremolo" by using the simple GUI commands, or also can be controlled by the position of a ball by clicking-and-dragging in an X-Y axis. The panning slider controls the output effect distribution between left and right speaker.
*

Multiple-Mode Filter that includes LP (Low pass), BP (Band pass), HP (High pass), notch, peak, low pass and high pass shelving filter with adjustable cutoff and bandwidth. The values are automatically computed when you select any of the filter types.
*

ADSR envelope generator with Attack, Sustain, Decay and Release parameters and several modulation targets.
*

16 presets for effects ready to play.
*

Portamento/Glide control: A gliding effect that allows a sound to change pitch at a gradual rate, rather than abruptly, when a new key is pressed or MIDI note sent.
*

Reverb effect built-in: Customizable with user controls for: size room, width room, damping factor & mixer.
*

Delay effect built-in: Creates a delay (echo) effect on audio signals controlled by amount of feedback and modulation of delay time.
*

On-screen MIDI keyboard that can be played with the mouse, or keyboard (Q is Middle-C, Z two Octaves lower) The 'T' on the left of the keyboard sets Toggle Mode where each key stays held until you click it a second time.
*

MIDI Channel selector : 1 to 16 channels.
*

FULL MIDI Automation: Complete MIDI Continuous Controller. You can use this to automate parameter changes from a sequencer, or to control your synthesizers from an external MIDI control surface.

System Requirements

*

Operating System : Windows® 98/ME, Windows® 2000, Windows® XP.
*

Linux Operating System (Requirements)
*

Processor: Pentium®, Celeron® or equivalent - 500 MHz or more.
*

RAM: 64 MB of memory (128 MB recommended)
*

VST 2.0 Host application like: FL Studio 6.xx, 5.xx, Steinberg Cubase VST 5/32, Cubase VST 5 Score, Cubase VST 5 Standard, Cubase SL 1.xx, 2.xx, Cubase SX 1.xx, 2.xx, 3.xx, Synapse Orion Pro 4.xx, Synapse Orion Platinum 5.xx, Mackie Tracktion 2.xx, Audio Mulch 1.0rc1, 0.9xx, Steinberg Nuendo 1.xx, 2.xx, 3.xx, Samplitude 8.xx, Cakewalk's SONAR 5 Producer Edition and Studio Edition, SONAR Home Studio 4 and Home Studio 4 XL and more ...
*

Graphics (minimum): 16-bit 800x600
*

Work with other hosts, as a DirectX plug-in using the FXpansion Vst-Dx V3/4 adapter or running ToneWise's DirectiXer 2. Is the easiest way to gain access to the hundreds of VST plug-ins from your DirectX audio application. Compatible with the Cakewalk Audio line (v6 and higher), FASoft N-Track, Sonic Foundry ACID, Sound Forge and Vegas (as an Aux effect only, in Vegas), Syntrillium Cool Edit Pro, SEK'D Samplitude and Samplitude 2496, and many more.
*

Other Components: PC configured according to the specifications of the host application
*

An ASIO soundcard is recommended for low latency real-time play.

Linux Requirements:

*

- JACK : 0.100.0 or above (http://jackit.sourceforge.net)
*

- Wine : preferably 1.0 or above (many older versions will work too) (http://www.winehq.org/)
*

- FST : 1.7 or above (http://joebutton.co.uk/fst/)