URS 1975 Classic Compressor Limiter ™
* High Res 48 bit Double Precision processing
* Adjustable Knee control from hard to soft
* Compressor and separate "Brick Wall" Limiter
* Internal Side Chain with High and Low Pass Filtering
* Stereo, Mono and Multi-Mono
The URS 1975 Classic Compressor digitally recreates a popular feed forward 1975 VCA Compressor.
The URS 1975 Classic Compressor digitally recreates of a transformer input and voltage controlled gain reduction amplifier (VCA) characteristics.
Warm and aggressive!
High Res 48 bit "Double Precision" processing
The URS 1975 Classic Compressor TDM version features Hi Resolution 48-bit TDM and 64-bit RTAS
"Double Precision" processing for increased clarity, headroom and unparalleled gain reduction. Hi Resolution "Double Precision" processing helps to avoid internal clipping in the Digital Domain.
Adjustable Knee control
The Compressor’s Knee is fully adjustable from hard to soft. The Compressor/Limiter/Side Chain version has adjustable knee as well. This allows for:
* soft compression and soft knee limiting.
* soft compression and hard knee limiting.
* hard compression and hard knee limiting.
* hard compression and soft knee limiting.
Independent Compressor and Limiter sections
The Compressor and Limiter sections are totally independent of each other. Both feature separate variable Attack, Release and Threshold controls.
Built in Internal Side Chain Filtering
The Internal Side Chain High and Low Pass Filters fine tune how narrow or "Broad Band" the URS 1975 Classic Compressor will affect the program material. Both Filters completely overlap to dial in problem frequencies.
Listen Key
The Listen Key is after the Filters section. The Listen Key allows you to monitor the signal being sent to the Gain Reduction detection circuit.
Signal Flow explained
The URS 1975 Classic Compressor signal flow inserts the Gain Makeup control before the final Limiter. This is the secret to how hard you can hit the final "Brick Wall" Limiter. The URS Classic Compressor utilizes Feed-back gain sensing. Feed-back gain sensing gives Compression and Limiting a servo type of control. See the detailed signal flow diagram below.
Classic Sound with Modern Features
The URS 1975 Classic Compressor adds other powerful modern features such as totally variable Compression Ratios, Attack and Release times.
Two Different Plug-ins
Two different URS 1975 Classic Compressor plug-ins are included:
• Compressor/Limiter/Side Chain version
• Compressor only version
The 1975 Compressor/Limiter/Side chain version has a modern "Brick Wall Limiter that was not found on the vintage unit. The 1975 Compressor /Limiter / Side chain version is also well suited for drum Sub groups, Aux sends (TDM versions) and highly recommended especially on the Mix Bus.
The 1975 Compressor only version is also 3x more DSP efficient. The 1975 Compressor Only version will act as a Limiter when the ratio is set at 10:1 and above.
Features
# Pro Tools 7.1.x and Tiger OSX 10.4.6compatibility
# Pro Tools 6.9.2 and Tiger OSX 10.4.6 compatibility
# Pro Tools 6.9.2and Panther OSX 10.4.6 compatibility
# Pro Tools 6.7 and Panther OSX 10.3.9 compatibility
# Pro Tools 6.2.3 and Jaguar 10.2.8 compatibility
# Pro Tools M-Powered version 7.x.x compatibility
# Full Windows XP support!
# Full Pro Tools TDM support for Pro Tools|HD Accel, Pro Tools|HD and Pro Tools 24|MIX systems
# Full 192 kHz support for TDM, RTAS and AudioSuite versions
# Full ProControl, Control|24, Command|8 and Digi 002 support
# Full ICON Console Control Surface support — including center section Dynamics panel
# Supports Mbox, Digi 001, Digi 002, Digi 002 Rack, Pro Tools|24 MIX, Pro Tools|HD and Pro Tools|HD Accel and M-Audio Interfaces.
1975's Specifications
* Input Level
* Gain Make up Output Control
* Separate Limiter and Compressor Threshold controls
* Variable Limiter Knee
* Variable Limiter Attack Time 1ms - 50ms.
* Variable Limiter Release Time 50ms - 1500ms
* "Brick Wall" Limiter Ratio fixed at 1000:1
* Variable Compressor Knee
* Variable Compressor Attack Time 1ms - 50ms.
* Variable Compressor Release Time 100ms - 1500ms.
* Selectable Compressor Ratio 1:1, 2:1, 3:1, 4:1. 6:1, 8:1, 10:1, 20:1. Infinity
* Variable Hi-pass Filter Side chain @ 12dB per Octave 20hz to 5K
* Variable Lo-pass Filter Side chain @ 12dB per Octave 20Khz to 1k
* Gain Reduction Meter
* In / Out Bypass switch - selectable Limiter, Compressor or both
* Line input Trim offers -10 to +20 gain variable to .1db
* Plasma Style Input and Output VU Meters
* Compressor/Limiter/Sidechain Instances- 9 per HD Accel chip and 4 Instances per HD chip and 2 per MIX chip
* Compressor only Instances - 17 per HD Accel chip and 8 Instances per HD chip and 4 per MIX chip
Price:
TDM $449.99 * VST and Audio Units versions coming soon!
RTAS $249.99 * VST and Audio Units versions coming soon!
Comments
Post a Comment